Panasonic PT-L6600UL Installation Guide
5.3. Canceling the service support mode
Press the MENU button on the main unit or the remote control unit.
6. Using the SERIAL Connector
SERIAL connector which is on the side interface panel of the projector conforms to
RS-232C standard. This projector can be controlled by a PC which is connected as
shown in "6.1. Connection".
For controlling this projector by a PC, requires communication software on the market,
and inputs control commands according to communication settings and basic format
below.
RS-232C standard. This projector can be controlled by a PC which is connected as
shown in "6.1. Connection".
For controlling this projector by a PC, requires communication software on the market,
and inputs control commands according to communication settings and basic format
below.
6.1. Connection
Note:
Use a proper communication cable which is suitable for the PC to connect SERIAL
connector and the PC.
connector and the PC.
6.2. Pin Layout and Signal Names for SERIAL Connector
6.2.1. SERIAL IN Terminal
10