Panasonic PT-LB20NTU Network Guide

14

When the network number to be
connected differs, select the
network number to be connected.
The network settings change
according to this selection.
This network number is stored in
the computer, so connection is
performed with the current
number the next time Wireless
Manager ME 2.0 is started up.

This indicates the number of people connected to this

projector.

This indicates the status of this projector.

This appears when password entry is needed for connection. 
(See page 27)

Projector name (See page 30)

When there are two or more projectors with the same name, each
projector is automatically assigned its own ID for identification purposes.

The equipment to be connected can be designated when [Network] 
is set to [USER].

Click this to display the projector name at the upper left of the projection screen for
the projector in question.

When only one projector is connected, select [Single] and the
projector from the list of destination.
When multiple projectors are connected, select [Multi-] and
select multiple projectors.

When the [Make an automatic connection] checkbox in [Automatic connection setting]
has been checked in Options (see page 26) and a connection with the projector
registered as a destination for automatic connection is possible, connection with the
projector will be performed automatically, and the connection select window will not be
displayed.

→

→

→