Panasonic PT-LB20NTU Network Guide
38
Computer settings
Notes:
• When the projector settings have been changed using a WebBrowser, the
• When the projector settings have been changed using a WebBrowser, the
projector will not appear on the connection list until the projector network is
switched to [USER].
switched to [USER].
• After the projector network has been switched to [USER], manually release the
proxy settings of the WebBrowser used.
Using WebBrowser
Projector settings
WEB CONTROL
ON: This enables control on the WebBrowser.
OFF: This disables control on the WebBrowser.
OFF: This disables control on the WebBrowser.
Select [WEB CONTROL] on the network menu
(See page 28)
.
1
Select [ON] or [OFF] with the [
] buttons.
2
Note:
The WebBrowser password is not set at the factory, and should be set on the
WebBrowser. In addition, if you forget the password, select [DEFAULT] at the
network menu and initialize the network settings. (See page 37)
The WebBrowser password is not set at the factory, and should be set on the
WebBrowser. In addition, if you forget the password, select [DEFAULT] at the
network menu and initialize the network settings. (See page 37)
Connect the projector and computer before taking the steps below.
(See page 12 or page 32)
(See page 12 or page 32)
1
LB20NT
OFF
ON
NETWORK
NAME CHANGE
INPUT PASSWD
AMEND PASSWD
NAME CHANGE
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
SELECT
DEFAULT
SELECT
N E T W O R K
RETRN
ENTER
Click [
] on the launcher
(See page 15)
.
1
Change the projector settings by WebBrowser.
Make the SSID, communication mode, IP address, subnet mask and WEP
settings, and then quit WebBrowser.
settings, and then quit WebBrowser.
2