Panasonic kx-th1211 Operating Guide
Useful Information
47
For assistance, please visit http://www.panasonic.com/help
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the
batteries from the handset, and then insert the batteries into the handset again.
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the
batteries from the handset, and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The unit does not work.
L
L
Fully charge the batteries (page 14).
L
Check the connections (page 12).
L
Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
unit. Reconnect the adaptor and try again.
L
The handset has not been registered to the
base unit. Register the handset (page 34).
base unit. Register the handset (page 34).
I cannot register a cellular
phone to the base unit.
phone to the base unit.
L
Depending on the compatibility of the cellular
phone, you may not be able to register it to the
base unit.
phone, you may not be able to register it to the
base unit.
L
Confirm that your cellular phone supports the
hands-free profile (HFP) specification. If it
does not, you cannot register it to the base
unit.
hands-free profile (HFP) specification. If it
does not, you cannot register it to the base
unit.
L
Confirm that the Bluetooth feature of your
cellular phone is turned on. You may need to
turn this feature on depending on your cellular
phone.
cellular phone is turned on. You may need to
turn this feature on depending on your cellular
phone.
L
The Bluetooth technology on your cellular
phone may not be functioning normally. Turn
off and on your cellular phone.
phone may not be functioning normally. Turn
off and on your cellular phone.
L
It may take more than 10 seconds to complete
registration after you have performed all
operations with the cellular phone. Wait until
the LINK TO CELL indicator lights green.
registration after you have performed all
operations with the cellular phone. Wait until
the LINK TO CELL indicator lights green.
L
If your cellular phone is already connected to
another Bluetooth device such as a Bluetooth
headset, turn it off or disconnect it from your
cellular phone.
another Bluetooth device such as a Bluetooth
headset, turn it off or disconnect it from your
cellular phone.
TH12XX.book Page 47 Thursday, August 21, 2008 3:03 PM