Panasonic KXTG8321FX Operating Guide
Preparation
17
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
performance (supplied batteries)
Note:
L
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L
The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Screen saver mode
The backlight goes dark when on a
call or turns off completely after 1
call or turns off completely after 1
minute of inactivity if the handset is not
on the base unit or charger.
Activate the handset display again by:
– pushing the joystick left {<} or right
on the base unit or charger.
Activate the handset display again by:
– pushing the joystick left {<} or right
{>}
when on a call.
– pressing {ih} at all other times.
Symbols used in these
operating instructions
operating instructions
Turning the power
on/off
on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Battery icon
Battery level
&
High
(
Medium
)
Low
L
L
When flashing:
Needs charging.
Needs charging.
Operation
Operating time
In continuous use
15 hours max.
Not in use
(standby)
(standby)
250 hours
(10 days) max.
(10 days) max.
Symbol
Meaning
{ }
The words in the
brackets indicate button
names on the handset
and base unit.
Example:
Unit keys: {C}, {ih}
brackets indicate button
names on the handset
and base unit.
Example:
Unit keys: {C}, {ih}
i
Proceed to the next
operation.
operation.
“ ”
The words in quotations
indicate the menu on the
display.
Example:
“Auto Talk”
indicate the menu on the
display.
Example:
“Auto Talk”
{V}
/{^}:
“ ”
Push the joystick down
or up to select the words
in quotations.
Example:
{V}
or up to select the words
in quotations.
Example:
{V}
/{^}: “Off”
TG8301-8321FX(e-e).book Page 17 Thursday, April 3, 2008 1:04 PM