Panasonic KXFLB750NE Operating Guide
Sending Faxes
(41)
Sending the same document
to pre-programmed parties
to pre-programmed parties
1
Insert the document FACE DOWN into the
feeder.
feeder.
L
Confirm that there are no documents
on the scanner glass.
on the scanner glass.
L
If necessary, press
{
RESOLUTION
}
repeatedly to select the desired setting
(page 31).
(page 31).
2
Press the desired
{
BROADCAST
}
(1-2) or
{
MANUAL BROAD
}
.
L
You can also use the navigator key.
Press
Press
{>}
, then press
{+}
or
{-}
until
the desired key name is displayed, and
press
press
{
FAX START
}
.
Example:
<BROADCAST1>
EDIT:PRESS MENU
EDIT:PRESS MENU
b
<BROADCAST1>
SEND:PRESS SET
SEND:PRESS SET
L
The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
and scanned into memory. The unit will
then transmit the data to each entry,
calling each number sequentially.
L
After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L
Do not open the document cover when
sending a fax with the auto document feeder.
sending a fax with the auto document feeder.
L
If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
L
If the document exceeds the memory
capacity (page 83), sending will be cancelled.
capacity (page 83), sending will be cancelled.
L
If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialled up to 5 times after all of the
other entries have been called.
answer, it will be skipped. All skipped entries
will be redialled up to 5 times after all of the
other entries have been called.
To send the same document using the
scanner glass
scanner glass
L
Confirm that there are no documents in
the auto document feeder.
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then
close the document cover.
3. Press the desired
{
BROADCAST
}
(1-2) or
{
MANUAL BROAD
}
.
L
To send a single page, skip to step 6.
L
To send multiple pages, go to the next
step.
step.
4. Place the next page.
5. Press
{
SCAN
}
.
L
To send more pages, repeat steps 4 and
5.
5.
6. Press
{
FAX START
}
.
To cancel the broadcast setting
1. Press
{
STOP
}
while the unit displays the
following.
BROADCASTING
L
The display will show the following.
SEND CANCELLED?
YES:SET/NO:STOP
YES:SET/NO:STOP
2. Press
{
SET
}
.
{>}
{+}
{-}
{STOP}
{RESOLUTION}
{FAX START}
{SCAN}
{MANUAL BROAD}
{SET}
FACEDOWN
{BROADCAST}