Panasonic KXFLB750NE Operating Guide

Setup (PC)

(52)

Multi-Function Station software

Connecting to a computer

Panasonic Multi-Function Station software enables your fax machine to carry out the following functions:
–

Printing on plain paper, transparencies, labels and envelopes

–

Scanning documents and converting an image into text with Readiris OCR software

–

Scanning from other Microsoft

Windows

applications that support TWAIN scanning

–

Storing, editing or erasing entries in directories from your PC

–

Programming the basic and advanced features from your PC

To run Multi-Function Station software, you need the following:

When using an IEEE1284 compliant parallel cable:
Parallel cable (amphenol 36 pin, less than 3 metres long) must be purchased separately.

When using a USB cable (Windows 95 does not offer USB support):
USB cable (less than 3 metres long) must be purchased separately.
After connecting the USB cable, you must set the cable type to “USB” (feature #15 on page 62).

Note:

If you want to replace the parallel cable with a USB cable and vice versa, see page 73.

–

Compatible OS:

Windows 95/98/Me/2000

–

CPU:

Windows 95/98:

Pentium

90 MHz or higher processor

Windows Me:

Pentium 150 MHz or higher processor

Windows 2000:

Pentium 166 MHz or higher processor

–

Memory minimum: Windows 95/98:

24 MB (32 MB or more is recommended.)

Windows Me:

32 MB (64 MB or more is recommended.)

Windows 2000:

64 MB

–

Hard disk:

More than 40 MB available space

–

Other:

Parallel (IEEE1284) port or USB port, and CD-ROM drive