Panasonic KXPRS110FX Operating Guide
Setting up
Connections
n
Base unit
Connect the AC adaptor plug to the unit
until you hear a click.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit until you hear a click.
Fasten the cord by hooking it.
Connect the telephone line cord to the
telephone line jack until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
until you hear a click.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit until you hear a click.
Fasten the cord by hooking it.
Connect the telephone line cord to the
telephone line jack until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
R Use only the supplied Panasonic AC
adaptor PNLV226CE.
R Use only the supplied telephone line cord.
1
4
7
6
3
2
5
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (A).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
,
).
1
R Follow the directions on the display to set
up the unit.
Battery charging
Charge for about 7 hours.
R Confirm “Charging” is displayed (A).
R When the batteries are fully charged,
R Confirm “Charging” is displayed (A).
R When the batteries are fully charged,
“Fully charged” is displayed.
1
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
10
Getting Started
PRS110FX(en)_0113_ver201.pdf 10
2015/01/13 19:41:43