Panasonic KXPRS110FX Operating Guide
Note:
R To stop the alarm, press MStopN or place
R To stop the alarm, press MStopN or place
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
mode.
Viewing entries
1
MMenuN (right soft key) a
a MOKN
2
To see the entries on the selected date,
press MOKN.
To see the schedule list, press MListN.
R You can see detailed information
press MOKN.
To see the schedule list, press MListN.
R You can see detailed information
about the schedule by pressing
MMenuN. a MbN: “Detail” a MOKN
MMenuN. a MbN: “Detail” a MOKN
Editing an entry
1
MMenuN (right soft key) a
a MOKN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: “Edit” a MOKN
4
Edit the date if necessary. a MOKN
5
Edit the time if necessary. a MOKN
6
Edit the text memo if necessary (30
characters max.). a MOKN
characters max.). a MOKN
7
MbN: Select the desired alarm tone. a
MOKN 2 times a M
MOKN 2 times a M
N
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
MMenuN (right soft key) a
a MOKN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: “Erase” a MOKN
4
MbN: “Yes” a MOKN a M
N
Erasing all entries
1
MMenuN (right soft key) a
a MOKN
2
MListN a MMenuN
3
MbN: “Erase All” a MOKN
4
MbN: “Yes” a MOKN
5
MbN: “Yes” a MOKN a M
N
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to a single
base unit.
Important:
R The additional handset model
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
on page 4. If another handset model is
used, certain operations may not be
available.
Additional base units
Handsets can be registered to up to 4 base
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when “Auto” is selected on
base unit (page 33), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a “radio cell”.
Note:
R Calls are disconnected when the handset
units, allowing you to add additional base units
and extend the area in which your handset(s)
can be used. If a handset moves out of range
of its base unit when “Auto” is selected on
base unit (page 33), it looks for another
base unit to make or receive calls. A base unit
and the handsets it communicates with is
called a “radio cell”.
Note:
R Calls are disconnected when the handset
moves from one radio cell to another.
Registering a handset to a base
unit
unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1
Handset:
MMenuN (right soft key) #130
MMenuN (right soft key) #130
2
MbN: Select a base unit number. a MOKN
R This number is used by the handset as
R This number is used by the handset as
a reference only.
3
Base unit:
Press and hold M
Press and hold M
N for about 5 seconds.
32
Programming
PRS110FX(en)_0113_ver201.pdf 32
2015/01/13 19:41:44