Panasonic KXPRS110FX Operating Guide
Problem
Cause/solution
Noise is heard, sound cuts
in and out.
in and out.
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
jack. Contact your DSL/ADSL provider for details.
Sound quality seems to be
getting worse.
getting worse.
R You have registered a handset that is not recommended
(page 4). The clearest sound quality is only possible by
registering the recommended handset.
registering the recommended handset.
The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 15,
23).
R Night mode is turned on. Turn it off (page 27).
I cannot make a call.
R The dialling mode may be set incorrectly. Change the setting
(page 14).
R You dialled a call restricted number (page 31).
R The key lock feature is turned on. Turn it off (page 17).
R The key lock feature is turned on. Turn it off (page 17).
Caller ID
Problem
Cause/solution
Caller information is not
displayed.
displayed.
R You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is slow
to display.
to display.
R Depending on your service provider/telephone company, the
unit may display the caller’s information at the 2nd ring or later.
Set the first ring to “Off” (page 23).
Set the first ring to “Off” (page 23).
R Move closer to the base unit.
Time on the unit has
shifted.
shifted.
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to “Manual” (off) (page 23).
SMS (Short Message Service)
Problem
Cause/solution
The SMS message
centre number is logged
in the caller list and the
message is not received.
centre number is logged
in the caller list and the
message is not received.
R Someone tried to send you a message while SMS is turned off.
Turn it on (page 36).
44
Useful Information
PRS110FX(en)_0113_ver201.pdf 44
2015/01/13 19:41:45