Panasonic KXTGL433 Operating Guide
4
Wait for the paged party to answer.
R If the paged party does not answer,
R If the paged party does not answer,
press MBACKN to return to the outside
call.
call.
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
MSELECTN
You can continue the conversation
with the outside caller.
Intercom
Intercom calls can be made between
handsets.
Note:
R When paging unit(s), the paged unit(s)
handsets.
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds.
To finish intercom, press MOFFN. To answer
the call, press M
To finish intercom, press MOFFN. To answer
the call, press M
/ZN.
R To change the ringer volume and ringer
tone for intercom, see page 25.
Making an intercom call
1
1
MMENUN a MbN: “Intercom” a
MSELECTN
MSELECTN
2
MbN: Select the desired unit or “Voice
paging”. a MSELECTN
R If you select “Voice paging”, speak
paging”. a MSELECTN
R If you select “Voice paging”, speak
into the microphone after the beep.
Your voice will be heard using the
speakers of all handsets, until a paged
Your voice will be heard using the
speakers of all handsets, until a paged
party answers your page or until you
press MOFFN.
After the other party answers, the
speakerphone mode is turned on.
press MOFFN.
After the other party answers, the
speakerphone mode is turned on.
3
When you finish talking, press MOFFN.
Note:
R You can also use the MINTERCOMN soft
R You can also use the MINTERCOMN soft
key, if displayed, to make intercom calls.
R You cannot use voice paging if other units
are in use.
R Voice paging is not available when a range
extender (KX-TGA405) is registered to the
base unit.
base unit.
Answering an intercom call
1
1
When the unit is paged, lift the handset.
n
n
To answer using the receiver
Press M
Press M
/ZN.
n
To answer using the speakerphone
Press and hold M
Press and hold M
/ZN for a few
seconds.
2
When you finish talking, press MOFFN.
Turning auto intercom on/off
This feature allows the handset to answer
intercom calls automatically when it is called.
You do not need to press M
intercom calls automatically when it is called.
You do not need to press M
/ZN. When this
feature is set to “On”, the monitoring handset
for the baby monitor feature (page 31) will
also answer baby monitor calls automatically.
The default setting is “Off”.
for the baby monitor feature (page 31) will
also answer baby monitor calls automatically.
The default setting is “Off”.
1
MMENUN#273
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
MSAVEN a MOFFN
Note:
R This feature is not available for all handsets
R This feature is not available for all handsets
paging and voice paging even if it is turned
on.
on.
For assistance, please visit http://shop.panasonic.com/support
17
Making/Answering Calls
TGL43x(en)_1117_ver041.pdf 17
2015/11/17 16:08:02