Panasonic KXTG8561FX Operating Guide

Page of 64
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1
 (middle soft key) #138
2
MbN: Select the desired setting. a 
a M
N
Note:
R After turning the repeater mode on or off,
 is displayed on the handset
momentarily. This is normal and the
handset can be used once 
 is displayed.
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Proceed with the operation for your
model.
n
KX-TG8551 series: page 3
Press and hold M
N for about 5
seconds. (No registration tone)
n
KX-TG8561 series: page 3
Press and hold M
N for about 5
seconds, until the registration tone
sounds.
R The next step must be completed
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the 
 indicator and 
 indicator light
green.
3
Base unit:
To exit the registration mode, press M
N.
R The registration tone stops.
(KX-TG8561 series: page 3)
41
Programming
TG8551_61FX_(en-en)_0427_ver021.41   41
2012/04/27   20:24:47