Panasonic KXMB781 Operating Guide

57

LAN setting with a DHCP 
server
{#}{

5}{0}{0}

{

0} “

DISABLED”: Deactivates this feature.

{

1} “

ENABLED” (default): The following will be allocated automatically using a 

DHCP (Dynamic Host Configuration Protocol) server.
–

IP address

–

Subnet mask

–

Default gateway

Setting the IP address for the 
LAN connection
{#}{

5}{0}{1}

This feature is available when feature #500 is deactivated.

1. {MENU} i {#}{5}{0}{1} i {SET}

2. Enter the IP address of the unit on the LAN using the dial keypad. i 

{

SET} i {MENU}

Setting the Subnet mask for 
the LAN connection
{#}{

5}{0}{2}

This feature is available when feature #500 is deactivated.

1. {MENU} i {#}{5}{0}{2} i {SET}

2. Enter the subnet mask of the network on the LAN using the dial keypad. i 

{

SET} i {MENU}

Setting the default gateway 
for the LAN connection
{#}{

5}{0}{3}

This feature is available when feature #500 is deactivated.

1. {MENU} i {#}{5}{0}{3} i {SET}

2. Enter the default gateway of the network on the LAN using the dial keypad. 

i {SET} i {MENU}

Setting the primary DNS 
server for the LAN 
connection
{#}{

5}{0}{4}

This feature is available when feature #500 is deactivated.

1. {MENU} i {#}{5}{0}{4} i {SET}

2. Enter the primary DNS server of the network on the LAN using the dial 

keypad. i {SET} i {MENU}

Setting the secondary DNS 
server for the LAN 
connection
{#}{

5}{0}{5}

This feature is available when feature #500 is deactivated.

1. {MENU} i {#}{5}{0}{5} i {SET}

2. Enter the secondary DNS server of the network on the LAN using the dial 

keypad. i {SET} i {MENU}

Setting the machine name
{#}{

5}{0}{7}

1. {MENU} i {#}{5}{0}{7} i {SET}

2. Enter the name of the unit to recognize on the LAN, up to 15 characters (see 

page 60 for character entry). i {SET} i {MENU}

L

In order to recognize the unit on the LAN, the default name of the unit is 
assigned automatically. If you change the name, assign the unique name to 
avoid overlapping.

Displaying the MAC address 
of the unit
{#}{

5}{0}{8}

1. {MENU} i {#}{5}{0}{8} i {SET}

2. The MAC address of the unit will be displayed. i {MENU}

Approving users for the LAN 
connection
{#}{

5}{3}{2}

{

0} “

DISABLED” (default): Deactivates this feature.

{

1} “

ENABLED”: The unit will deny/approve access from the pre-programmed 

IP patterns. Whether to deny or approve, and up to 4 patterns can be 
programmed using the web browser (page 48).

Setting the IP address 
automatically for the LAN 
connection
{#}{

5}{3}{3}

This feature is available when feature #500 is activated.
{

0} “

DISABLED” (default): Deactivates this feature.

{

1} “

ENABLED”: IP address will be allocated automatically without using a 

DHCP (Dynamic Host Configuration Protocol) server.