Panasonic NA16VX1 Operating Guide

32

 

( When the error display comes on, a buzzer sounds and U 

and a number appear alternatively.)

Check the drain hose, making sure

● it isn’t clogged up

● its tip isn’t immersed in water

● it doesn’t extend further than 3 metres

● the water isn’t frozen.

● Cleaning the drain filter  

(see page 29)

Correct any 
of these 
problems, then 
open the door, 
shut it and start 
the washing 
machine again.

● Make sure the door is shut properly.

● The laundry may be too heavy. If so,

unravel a tangle of items.

● The laundry may be too light. If so, add

one or two bath towels.

● One or more items may be too large,

such as blankets. If so, reduce the load.

● The washing machine may be on an

unstable or uneven surface.

Correct any 
of these 
problems, then 
open the door, 
shut it and start 
the washing 
machine again.

● Check the tap is open.

● Check the water pipe or hose isn’t frozen.

● Check the water supply hasn’t been

disrupted.

● Check the water-supply valve filter isn’t

clogged. (see page 28)

Correct any 
of these 
problems, then 
open the door, 
shut it and start 
the washing 
machine again.

● Make sure the drain filter is set properly. 

(see page 29)

● An error display starting with H doesn’t sound the buzzer. 

Press the power OFF button. If the display stays on, or 
it reappears when you press the START button, unplug 
the washing machine and contact your nearest Customer 
Service Centre.