Panasonic KXFLB813FX Operating Guide
Important Information
6
For best performance
Toner cartridge and drum unit
L
In the printing process, heat is used to fuse
toner onto the page. As a result, it is normal
for the machine to produce an odour during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
toner onto the page. As a result, it is normal
for the machine to produce an odour during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
L
To extend the life of the drum unit, the unit
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
L
Do not cover slots or openings on the unit.
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner (
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner (
1).
L
When replacing the toner cartridge or drum
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
L
For optimal performance, genuine Panasonic
toner cartridges and drum units are
recommended. We cannot be responsible for
problems that may be caused by a non-
Panasonic toner cartridge or drum unit:
–
toner cartridges and drum units are
recommended. We cannot be responsible for
problems that may be caused by a non-
Panasonic toner cartridge or drum unit:
–
Damage to the unit
–
Poor print quality
–
Improper Operation
Static electricity
L
To prevent static electricity damage to the
interface connectors or other electrical
components inside the unit, touch a
grounded metal surface before touching the
components.
interface connectors or other electrical
components inside the unit, touch a
grounded metal surface before touching the
components.
Environment
L
Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.
generating devices, such as fluorescent
lamps and motors.
L
The unit should be kept free from dust, high
temperature and vibration.
temperature and vibration.
L
The unit should not be exposed to direct
sunlight.
sunlight.
L
Do not place heavy objects on top of the unit.
L
When you leave the unit unused for a long
period of time, unplug this unit from the power
outlet.
period of time, unplug this unit from the power
outlet.
L
The unit should be kept away from heat
sources such as heaters, kitchen stoves, etc.
It should not be placed in rooms where the
temperature is less than 10 °C or greater
than 32.5 °C. Damp basements should also
be avoided.
sources such as heaters, kitchen stoves, etc.
It should not be placed in rooms where the
temperature is less than 10 °C or greater
than 32.5 °C. Damp basements should also
be avoided.
Recording paper
L
Store unused paper in the original packaging,
in a cool and dry place. Not doing so may
affect print quality.
in a cool and dry place. Not doing so may
affect print quality.
Routine care
L
Wipe the outer surface of the unit with a soft
cloth. Do not use benzine, thinner, or any
abrasive powder.
cloth. Do not use benzine, thinner, or any
abrasive powder.
Moving the unit
L
The unit weights approximately 16 kg. It is
highly recommended that two people handle
this unit.
highly recommended that two people handle
this unit.
L
When moving the unit, hold both side grips
(
(
1).
1
1
1
1
Approx. 16 kg
FLB803_813FX-PFQX2567ZA-en.book Page 6 Thursday, March 30, 2006 3:25 PM