Panasonic KX-TD208E Operating Guide
17
3.
System Programming
[709][902][903]
Determines how the dialled number should be modified before sending to the exchange line.
Numbers are added to the beginning of the dialled number.
Numbers are added to the beginning of the dialled number.
¥ To delete the current entry, press # after entering the route number.
D
EFAULT
All routes Ð Not stored
C
HANGE
The Programming Table is on page 31.
[903] Received Number Check
Indicates the number of the last outside incoming call which was transmitted from the ISDN
network on PC or on the display of the PT.
network on PC or on the display of the PT.
X Ð Selection number: 1 (indicates the leading 16 digits)
2 (indicates from 17th to 20th digit)
¥ You can also check this number by PC.
(1) Starts PC programming.
(2) Selects ÒReceived Number CheckÓ.
(2) Selects ÒReceived Number CheckÓ.
3
0
9
!
!
X
(1ááá2)
0
7
9
✎
[709] LCR Modify Added Number
route no.
(1ááá4)
number to be added
(0ááá9, 9 digits maximum)
!
!
[902] System Additional Information
Assigns the additional programming items, if required. There are 00 through 15 fields in
each Area 1 through 4.
each Area 1 through 4.
* Refer to ÒSelectionÓ shown in the lists.
D
EFAULT
Refer to ÒDefaultÓ shown in the lists.
C
HANGE
Write the change, if any, into ÒChangeÓ shown in the lists.
Explanation for Area 3
2
0
9
area code
(1ááá4)
selection no*
(0ááá1)
field no.
(00ááá15)
✎
Field
Description
Selection
Default
Reference
Selects whether a tone or internal
music is used for music on hold.
music is used for music on hold.
0 : tone
1 : music
None
12
0
Change