Panasonic S-ICX Manual
Section 700 - Operation
Chapter 5. Key Telephone Features
S-ICX-45-700
S-ICX (International) issued June 2000
173
Considerations
•
If several calls arrive at a DSS/BLF key, the calls are queued and ring on a first-in, first-out basis.
•
If a BLF key has a second call while busy and off- hook signalling is enabled, the BLF key starts
blinking. The call can be answered by pressing the BLF key or going on hook and then off hook.
blinking. The call can be answered by pressing the BLF key or going on hook and then off hook.
DIL Appearances
DIL keys are used to originate and receive calls over specific trunk numbers (DIL keys can be
assigned to any trunk number).
assigned to any trunk number).
The LED for a DIL key will flash red on an incoming call even if the trunk is set to ring. If another
extension answers the call, the LED on the telephone will light solid red.
extension answers the call, the LED on the telephone will light solid red.
Operation
Hardware Requirements
•
N/A
Considerations
•
N/A
MCO Appearances
Description
You can make and receive trunk calls using an MCO key. Each extension can have up to 5 MCO
keys.
keys.
An MCO key can be assigned to any of the pooled trunk groups. Pressing the MCO key is the same as
dialling the MCO Access Code (usually 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or 81-84 by
default).
dialling the MCO Access Code (usually 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or 81-84 by
default).
Operation
Operation
Action
To originate a trunk call...
1. Press an idle DIL key.
2. The key blinks green as the call is made.
To place a call on Exclusive Trunk Hold (page 133)...
1. Press the DIL key.
To place a call on System Trunk Hold (page 133)...
1. Press the HOLD key.
To transfer a call...
1. Press the HOLD key.
2. Dial the destination extension.
3. Press the PROG key.
Operation
Action
To originate a trunk call
Press an idle MCO key.
The key blinks (green) as the call is made.