Panasonic S-ICX Manual
Section 700 - Operation
Chapter 6. DSLT Features
S-ICX-45-700
S-ICX (International) issued June 2000
219
Hardware Requirements
•
An Call Logging printer or external call accounting system is required to collect account code
records.
records.
Considerations
•
Account codes are not available during conversation recording mode for the Built-In Voice Mail.
•
Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
only.
•
Account codes will be cancelled after using trunk queuing.
•
Account Codes interact with TRS (Call Barring) as shown in the following table:
Attendant Group Calls
Description
You can call the attendant group from any extension by dialling the designated attendant number.
Operation
To call an attendant group:
3. Enter the Account Code (10 digits).
4. Press a vacant CO Trunk key or enter a trunk access code
(default = 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or
81-84).
81-84).
5. Dial the phone number.
Forced or Not Forced
Verified or
Non-Verified
TRS (Call Barring) Class
No Account Entry
Account Entry
Not Forced
Non-Verified
Extension Port Based TRS
Class
Extension Port Based TRS
Class
Verified
Account Code Based TRS
Class
Forced
Non-Verified
TRS Class for Forced
Account Code
(FF1 0 19 0001)
Extension Port Based TRS
Class
Verified
Account Code Based TRS
Class
Action
Result
1. Lift the handset or press the ON/OFF
key.
Intercom dial tone
2. Enter the attendant pilot number (default = 0 [UK/HK] or 9
[Taiwan, Malaysia, Indonesia]).
Action
Result