Panasonic DPMC210 Operating Guide
3
2.2.2 Fax mis-dial prevention
2.2.3 Transferring received fax document automatically to email address
You can transfer the received fax document (fax to email feature) to desired email address automatically.
Transferred messages will not be deleted from the unit.
To activate this feature, set the following:
Transferred messages will not be deleted from the unit.
To activate this feature, set the following:
– Set the fax to email destinations
Confirming the destination
before sending a fax
MBNM4NM2NM0N
before sending a fax
MBNM4NM2NM0N
M0N “Off” (default): Deactivate this feature.
M1N “On”: You can send a fax after confirming the destination. When the
displayed destination is correct, press MStartN (DP-MB350)/MBlackN
(DP-MC210) to send the fax.
M1N “On”: You can send a fax after confirming the destination. When the
displayed destination is correct, press MStartN (DP-MB350)/MBlackN
(DP-MC210) to send the fax.
Setting dial keypad entry
restriction
MBNM4NM2NM1N
restriction
MBNM4NM2NM1N
M0N “Off” (default): Deactivate this feature.
M1N “On”: If you do not wish to dial a fax number manually using the dial
keypad, activate this feature.
M1N “On”: If you do not wish to dial a fax number manually using the dial
keypad, activate this feature.
Note:
R If you select “On”, you cannot make redial calls to fax numbers entered
R If you select “On”, you cannot make redial calls to fax numbers entered
using the dial keypad.
R If you select “On”, the fax number re-entry setting (feature #422) will be
deactivated.
Setting the fax number
re-entry before sending
MBNM4NM2NM2N
re-entry before sending
MBNM4NM2NM2N
M0N “Off” (default): Deactivate this feature.
M1N “On”: If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press MStartN (DP-MB350)/MBlackN (DP-MC210).
When the 2nd entry number matches the 1st entry number, you can send the
fax.
M1N “On”: If you dial a fax number manually using the dial keypad, you have to
re-enter the number and press MStartN (DP-MB350)/MBlackN (DP-MC210).
When the 2nd entry number matches the 1st entry number, you can send the
fax.
Setting the fax to email
destinations (LAN
connection only)
R This feature can be
destinations (LAN
connection only)
R This feature can be
programmed only through
the web browser interface.
the web browser interface.
Select email destinations where you want to send received fax document
automatically (up to 6 destinations).
automatically (up to 6 destinations).
Important:
R Program the email server settings, and the email destinations
R Program the email server settings, and the email destinations
beforehand.
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155).
2. [Utilities] A [Configuration Web Page] A [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155).
A [OK]
4. Select the [Fax Feature] tab.
5. Click [Edit] next to [Send User].
6. Enter the email address, up to 63 characters.
7. [Submit]
8. Close the web browser.
5. Click [Edit] next to [Send User].
6. Enter the email address, up to 63 characters.
7. [Submit]
8. Close the web browser.
Note:
R To check the status of the last 15 transfers, click [List] next to [Result] in
R To check the status of the last 15 transfers, click [List] next to [Result] in
step 5.