Panasonic KX-P7105 Operating Guide

■

Unables to search KX-P7110 printer using Network Setup Tool.
*Make sure that the printer is connected to the network correctly.
*In Option of the menu bar in Network Setup Tool, make sure Use TCP/IP  Protocol is

selected.

*Initialize the configuration and set up KX-P7110 again.  

Unables to print.
*Make sure that the printer is connected to the network correctly.
*Ping to the printer.
*Check whether the printer port name is “lp” if you are using LPR. 

■

Unables to find "KXP-Printer" in the Work Group in "Entire Network".
• Make sure that the KX-P7110 printer is connected to the network correctly.
• Check network configuration of Windows.
• It may take few minutes to be found in the Entire Network.

■

Unables to search KX-P7110 using Network Setup Tool.
• Check if the KX-P7110 is connected to the network correctly.
• In Option of the menu bar in Network Setup Tool, make sure Use IPX/SPX Protocol is

selected. 

• Initialize the configuration and set up KX-P7110 again.

Unables to connect to NetWare Server in Remote Printer mode.
• Make sure the frame type is set correctly. 
• KX-P7110 can switch between PSERVER and RPRINTER modes automatically, but it may

take extra time depending on the environment.

• Make sure the Print Server is loaded correctly on NetWare server 
• Make sure the correct print server name is assigned to the KX-P7110. If the print server

name is assigned to the KX-P7110, make sure it is the same as print server name on the file
server.

• If there are two more KX-P7110 on the network, make sure the assigned port name is

unique.