Panasonic KXMB1520SP Operating Guide

Page of 88
Problem
Cause & Solution
During programming, I
cannot enter the code or ID
number.
R All or part of the number is the same as another code or ID. Change the
number:
– fax activation code: feature #434 on page 57.
– auto disconnection: feature #435 on page 57.
The unit is beeping the
off-hook alert (KX-MB1520
only).
R Press MStopN to stop the beeping sound. The unit beeps when the off-hook
alert (feature #171 on page 52) is activated, and the unit is in the following
status.
– You pressed MSP-PhoneN, but did not dial.
– You pressed MSP-PhoneN during a conversation using the extension
telephone.
The speakerphone is not
working (KX-MB1520 only).
R Use the speakerphone in a quiet room.
R If the other party has difficulty hearing you,
– adjust the volume.
– speak near the microphone.
10.3.2 Printing problems
Problem
Cause & Solution
Recording paper is wrinkled
or folded when printed.
Make sure that the recording paper is loaded properly (page 14).
R Try turning the recording paper over or rotating it 180 degrees.
The printing quality is poor
(e.g. has smudges, blurred
points or lines).
ABC
R Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
R You may have used paper with a cotton and/or fibre content that is over
20 %, such as letterhead or resume paper.
R The recording paper is too damp. Use new paper.
R When you print several pages, the stacked paper may have smudges on the
back side after printing. To avoid this, expand the paper exit (page 16).
I changed the recording
paper, but the printing quality
is still poor.
not insert a document before correction fluid has dried completely.
The toner save mode of feature #482 is ON (page 54).
R The remaining toner is low. Replace the toner cartridge.
R To check the toner cartridge life and quality, please print the printer test list
A blank sheet is ejected.
R You placed the document facing the wrong way when using the copier.
R The other party placed the document in their fax machine the wrong way.
Check with the other party (KX-MB1520 only).
Coloured and grey objects
are printed in black instead of
greyscale when printing from
Microsoft PowerPoint or
other applications.
R Select [Color] or remove the check next to [Grayscale] in the print dialogue
so that coloured or grey objects will be printed in greyscale properly.
When using the unit as a
printer, the printing result is
distorted.
R When your unit is connected to the computer by USB, if you cancel printing
using your computer, then immediately re-start printing, the printing result
may be distorted. To avoid this, you must wait for 60 seconds before
re-printing.
70
10. Help