Panasonic DP-C322 Operating Guide
Network Configuration
4
1
Press the Function key.
2
Select "General Settings".
3
Select "09 Key Operator Mode".
4
Enter the Key Operator’s ID Code
(4 digits), and then select "OK".
5
Select "25 DHCP Default".
If DHCP Default is set to "Yes",
change the setting to "No", and
then select "OK".
6
Select "26 TCP/IP Address".
1
2
Follow the procedure below if your network is not configured with the DHCP server, and the TCP/IP parameters must be
setup manually.
setup manually.
- IP Address
- Subnet Mask
- Default Gateway
- Subnet Mask
- Default Gateway
1
2
●
Default identification code is "0000".
To change this identification code, please
contact system administrator.
To change this identification code, please
contact system administrator.
2
3
1
Function Key
Print On Line LED
· Please wait until the Print On Line LED is
· Please wait until the Print On Line LED is
ON to press the Function key.
Before operating the procedures, make sure the
Print On Line LED is lit.
Print On Line LED is lit.