Panasonic KXTG9150EX Operating Guide

Page of 224
Preparation
13
 
L
The AC adaptor should be connected to a 
vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to a 
ceiling-mounted AC outlet, as the weight 
of the adaptor may cause it to become 
disconnected.
Location
L
For maximum distance and noise-free 
operation, place your base unit:
– away from electrical appliances such as 
TVs, radios, personal computers or 
other phones.
– in a convenient, high and central 
location.
Battery 
installation/replacement
Important:
L
Use only the included rechargeable 
batteries noted on page 6, 8.
L
When replacing batteries, we recommend 
using the Panasonic rechargeable 
batteries noted on page 7, 8.
L
Wipe the battery ends (S, T) with a dry 
cloth.
L
When installing the batteries, avoid 
touching the battery ends (S, T) or the 
unit contacts.
1
Press the notch on the handset cover 
firmly and slide it in the direction of the 
arrow.
L
When replacing batteries, remove the 
old batteries positive (S) end first.
2
Insert the batteries negative (T) end 
first. Close the handset cover.
Battery charge
Place the handset on the base unit for 
about 7 hours before initial use.
When charging, “Charging” will be 
displayed.
When the batteries are fully charged, 
“Charge Completed” will be displayed.
L
While charging, the charge indicator on 
the handset lights in amber. When the 
batteries are fully charged, the charge 
indicator lights in green.
Note:
L
It is normal for the handset to feel warm 
during charging.
L
If you want to use the unit immediately, 
charge the batteries for at least 15 
minutes.
L
Clean the charge contacts of the handset 
and base unit with a soft, dry cloth once a 
month, otherwise the batteries may not 
charge properly. Clean more often if the 
unit is exposed to grease, dust, or high 
humidity.
Charge 
contact
TG9120_40_50EX(e).book  Page 13  Monday, August 7, 2006  3:52 PM