Panasonic ICX Manual
Built-In ACD Supervisor Guide
Section 521
ICX-35-521 (ACD 3.0)
ICX (International) issued March 1999
11
Operation
The following describes the operation in each of the processes.
EDIT (FF1)
This command resets the current setting of displayed program lines. Edit is
repeated from the specified program line through to the currently registered
final program line (excluding the END/DISC line).
repeated from the specified program line through to the currently registered
final program line (excluding the END/DISC line).
The following screen display shows an example of selection and setting of the
SEARCH command.
SEARCH command.
1. Press
soft keys (1 to 6) for the command to be set, and press the
HOLD key.
Example: Press soft key 6 to select SEARCH.
Example: Press soft key 6 to select SEARCH.
2. Set parameter 1, and press the HOLD key.
Example: Press key 2 to set group 2.
Example:
3. Set parameter 2, and press the HOLD key.
Example: Press keys 0, 1 and 5 to set the Search Timer to 15.
Example:
SEARCH 1,020,010
03:Select Cmd.
DISK
SEARCH
FWD
FWDVM
PLAY
RET
List
SEARCH 1
03:AGENT GRP.
Enter The AGENT
GROUP Number.
(1-3)
List
SEARCH 2,020
03:Search Timer
Enter The AGENT
Search Time.
1 to 600 sec.
List