Panasonic PT-AE2000E Operating Guide

Do not use the projector in a bath or shower.
 

Fire or electric shocks can result.

Do not place your skin into the light beam while the 
projector is being used.
 

Strong light is emitted from the projector’s lens. If you 
place directly into this light, it can hurt or damage 
your skin.

Do not look into the lens while the projector is being 
used.
 

Strong light is emitted from the projector’s lens. If you 
look directly into this light, it can hurt and damage 
your eyes.

 

Be especially careful not to let young children look 
into the lens. In addition, turn off the power and 
disconnect the mains plug when you are away from 
the projector.

Do not place your hands or other objects close to the 
air outlet port.
 

Heated air comes out of the air outlet port. Do not 
place your hands or face, or objects which cannot 
withstand heat close to this port [allow at least 
50 cm (20") of space], otherwise burns or damage 
could result.

Replacement of the lamp is recommended to be 
carried out by a qualified technician.
 

The lamp has high internal pressure. If improperly 
handled, explosion might result.

 

The lamp can easily become damaged if struck 
against hard objects or dropped, and injury or 
malfunctions may result.

When replacing the lamp, allow it to cool for at least 
one hour before handling it.
 

The lamp cover gets very hot, and touching it can 
cause burns.

Before replacing the lamp, be sure to disconnect the 
mains plug from the mains socket.
 

Electric shocks or explosions can result if this is not 
done.

Do not allow infants or pets to touch the remote 
control unit.
 

The accessory remote control unit can be used to 
operate not only the projector but also other 
appliances such as air conditioners and electrical 
device by programming them using the learning 
function. If the remote control unit operated 
inappropriately, fire or injury may result.

 

Keep the remote control unit out of the reach of 
infants and pets after using it.