Panasonic KXHNS107 Operating Guide
3
Open the options menu (see “Displaying the options menu”, Page 39).
4
Tap [Outdoor Camera Settings] or [Indoor Camera Settings].
5
Tap [Set Detection Area].
6
Tap the desired areas of the camera image.
R Gray areas of the camera image indicate areas for which image detection is disabled.
R Tap [Select All] to disable image detection for all areas of the camera image.
R Tap [Reset] to enable image detection for all areas of the camera image.
R Gray areas of the camera image indicate areas for which image detection is disabled.
R Tap [Select All] to disable image detection for all areas of the camera image.
R Tap [Reset] to enable image detection for all areas of the camera image.
7
Tap [OK].
Image brightness
You can adjust the overall brightness of the camera image.
You can adjust the overall brightness of the camera image.
1
From the [Home Network] app home screen, tap [Camera].
2
Tap the camera image of the desired camera.
3
Open the options menu (see “Displaying the options menu”, Page 39).
4
Tap [Outdoor Camera Settings] or [Indoor Camera Settings].
5
Tap [Brightness].
6
Tap
or
to decrease or increase the image brightness.
Temperature alert (indoor cameras only)
To configure the camera to send notifications if the camera’s ambient temperature is too cold or too hot,
see “Temperature alert (indoor cameras only)”, Page 72.
To configure the camera to send notifications if the camera’s ambient temperature is too cold or too hot,
see “Temperature alert (indoor cameras only)”, Page 72.
Sound alert (indoor cameras only)
To configure the camera to send notifications if the camera’s microphone detects sound, see “Sound
alert (indoor cameras only)”, Page 73.
To configure the camera to send notifications if the camera’s microphone detects sound, see “Sound
alert (indoor cameras only)”, Page 73.
Information about SD cards
SD card capacity and total recording time
The following recording times apply when images from one camera are recorded. All times are
approximate.
– 2 GB card: 15 hours
– 4 GB card: 30 hours
– 8 GB card: 60 hours
– 16 GB card: 120 hours
– 32 GB card: 240 hours
The following recording times apply when images from one camera are recorded. All times are
approximate.
– 2 GB card: 15 hours
– 4 GB card: 30 hours
– 8 GB card: 60 hours
– 16 GB card: 120 hours
– 32 GB card: 240 hours
Note:
R SD cards larger than 32 GB cannot be used.
R The times listed here are calculated theoretically. Actual recording time may vary.
R The file system and other information is stored on the SD card, therefore the card’s actual available
R SD cards larger than 32 GB cannot be used.
R The times listed here are calculated theoretically. Actual recording time may vary.
R The file system and other information is stored on the SD card, therefore the card’s actual available
capacity will be less than the card’s noted capacity.
SD card formatting
Before inserting an SD card in the hub, format the SD card using your computer and the SD formatting
tool available from the web page listed below.
{{"www.sdcard.org/downloads/formatter_4/"|tolink("http://www.sdcard.org/downloads/formatter_4/")}}
Before inserting an SD card in the hub, format the SD card using your computer and the SD formatting
tool available from the web page listed below.
{{"www.sdcard.org/downloads/formatter_4/"|tolink("http://www.sdcard.org/downloads/formatter_4/")}}
76
Using the app