Panasonic NVVP32Series Operating Guide

Page of 48
12
Setting Up for VHS
Make basic settings for VHS. These settings are retained in memory until they are changed, even if the unit is turned off.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Turn on the unit.
≥Press [VHS].
[1] 
Press [MENU].
 
[2] 
Press [
34] to select the menu.
[3] 
Press [ENTER].
The clock operates for at least 3 years on its backup system in the event of a power failure.
After 3 years, clock back up can only be guaranteed for maximum of 1 hour.
................................................................................................................................................................................................................
[1] Set each item with [
34 1]. 
Press [
2] to return to the previous item.
At the set time (H:M) point:
≥When [34] is kept pressed, the indication changes in 30 
minute steps.
≥There is no need to press [34] continuously.
................................................................................................................................................................................................................
[2] Press [MENU] to start the clock and 
exit the setting screen.
VHS
CANCEL/RESET
SLOW/
SEARCH
REW
FF
VHS/DVD
 
INDEX/SKIP
PLAY
TRACKING/V-LOCK
JET REW
CH
AV
VOLUME
DVD
PLAY LIST
DIRECT NAVIGATOR
TOP MENU
RETURN
DISPLAY
PLAY MODE
 REC MODE
VHS/DVD
QUICK REPLAY
AUDIO
REC
ENTER
PLAY SPEED
P.MEMORY
SLOW
-/- -
MENU
AV ENHANCER
PROG/CHECK
SET UP
I-TIMER
TIMER
 DVD-RAM
 DUBBING
PROG PLAY INPUT SELECT VHS STATUS
DVD STATUS
PICTURE MODE
GROUP
NAVI
VHS/DVD 
OUTPUT
ENTER
MENU
VHS
Common procedures
CLOCK SET
Time Reset Function
If the clock is less than 2 minutes early or late, it can easily be reset to the proper time.
Example: Resetting the clock to 12:00.00
1)  Display the “CLOCK SET” screen.
2)  When the current clock display on the unit is between 11:58.00 and 12:01.59, press [MENU] 
as soon as it is 12:00.00. This will reset the time to 12:00.00.
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
SELECT
END
:      , ENTER
:MENU
VHS
 
MENU
 
  H:M
  2004 
   0:00
CLOCK SET
ª To switch to the desired video
You can set the unit so that the VHS/DVD output is automatically 
switched to the device which starts playback.
1)  In the OPTION menu, 
select “OUT [VHS/DVD]” with [
34].
2) Press 
[
2 1] to change the setting.
3)  Press [MENU] twice to make the on- 
screen display disappear.
VHS:
The output is only for VHS, even if you press 
[VHS/DVD OUTPUT], the DVD video is not shown.
MANUAL: Press [VHS/DVD OUTPUT] to switch to the desired 
video source. They are not switched automatically.
AUTO (Initial setting):
VHS and DVD are automatically switched depending on 
the manipulation or the unit operation. You may also 
switch them with [VHS/DVD OUTPUT].
Notes:
≥You can switch to the desired video with the above operation only 
when the video from this unit is viewed through the VHS/DVD OUT 
terminal.
≥Depending on the operation, the output may not be switched 
automatically even if “AUTO” is selected. In this case, press [VHS/
DVD OUTPUT]
 to switch it manually.
≥After setting timer recording, the output is automatically switched to 
DVD even if “MANUAL” is selected.
OPTION 1/2
TAPE  SELECT 
[AUTO]
NTSC  INPUT SELECT 
[AUTO]
NTSC  PB SELECT 
[onPALTV]
JET  NAVIGATOR 
[OFF]
DELETE  NAVIDATA 
[NO]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
DUBBING  NORMAL  AUDIO  [L]
 
END :MENU
SELECT: 
VP32GL.book  12 ページ  2004年6月11日 金曜日 午後4時32分