Panasonic KX-TD612E Manual

Page of 284
General Features
Features Guide
151
If you assign an ISDN extension as the destination of 1:1 calls, be sure to select Busy  in 
programme [456] Call Handling When All Busy. Other selections are not applicable. 
If you assign an ISDN extension as one of the destinations of 1:N calls, be sure to select 
Recovery  in programme [456] Call Handling When All Busy. Other selections are not 
applicable.
Up to 60 handling tables (1-60) can be assigned.
Intelligent Call Handling table number 61 and 62 are reserved to handle calls which the 
system cannot analyse. Be sure 61 (for day mode) is assigned to at least 1 extension and 62 
(for night mode) is assigned to at least 1 extension. The destinations of 61 and 62 cannot be 
a floating extension, a phantom extension, or a voice mail extension.
If a floating extension/phantom extension/voice mail extension is assigned to receive a call, 
an extension and an ISDN extension cannot receive a call.
OGM examples
OGM 1 
"This is ABC company. For the sales division, press 1. For the service division, press 2. To call 
the operator, press 0."
"This is ABC company. To contact Mr. D, press 101. To contact Mrs. E, press 102."
OGM 2
"We are sorry. The line is currently busy."
OGM 3
"This is ABC company. Please leave a message after the beep."
For the Night Mode
"This is ABC company. We are sorry but our office is closed for the day."
LED Pattern of CO Button and DDI/CLIP Key
Receiving 
Patterns
CO Button
CLIP Button
The 
Extension 
is Idle
Busy
The 
Extension 
is Idle
Busy
1:1 
(Operator) 
or Call 
Waiting is 
on
Ringing
Flashing 
Green
Flashing 
Green
Flashing 
Green
OFF
1:1 
(Except for 
operator) 
and Call 
Waiting is 
off
Ringing
Flashing 
Green
Busy Tone 
(for a 
Caller)
Flashing 
Green
OFF