Panasonic KX-TD612E Manual
General Features
236
Features Guide
8.
Duration : shows the duration of the call as Hours/Minutes/Seconds.
9.
Cost : shows the amount of charge in matter units or currency units (e.g. ).
10.
Acc Code : shows the account code appended to the call.
11.
CD : shows the condition code.
T :Transfer
F :Call Forwarding to CO line
R : Receive an incoming call
A : Answer an incoming call
N : No answer an incoming call
D: Doorphone Call Forwarding to CO line
F :Call Forwarding to CO line
R : Receive an incoming call
A : Answer an incoming call
N : No answer an incoming call
D: Doorphone Call Forwarding to CO line
Conditions
•
When programmed for outgoing toll calls only, printing occurs only for calls which start
with the numbers stored in any Denied Code Table from levels 2 to 6.
with the numbers stored in any Denied Code Table from levels 2 to 6.
•
This system can store information on up to 100 calls. If more calls are initiated or received,
stored records are deleted starting from the oldest one.
stored records are deleted starting from the oldest one.
•
It is possible to select the SMDR format, page length, skip perforation and page width. If
80 characters for page width is selected, the last 5 digits of account codes are not printed
out.
80 characters for page width is selected, the last 5 digits of account codes are not printed
out.
•
This data is not deleted when you restart the system.
•
"(8) Cost" is printed out in the format selected in programme "[117] Charge Display
Selection."
Selection."
•
It is programmable to enable or disable the printout of secret dial numbers.
•
If the account code stored in location 01 of the programming table is dialled, the dialled
phone number is not printed out to SMDR (Private Call). Refer to lines 7 and 8 on the
example of printed call records.
phone number is not printed out to SMDR (Private Call). Refer to lines 7 and 8 on the
example of printed call records.
•
When the paper of the printer runs out or the printer is out-of-service, the indication "Check
Printer" is displayed on the telephone of Operator 1.
Printer" is displayed on the telephone of Operator 1.
•
It is possible to select whether or not to print out the data when the system receives a call
and a call is answered.
and a call is answered.
•
It is possible to select whether the account code is printed out or not. If it is not printed out,
it is shown in dots.
it is shown in dots.
Installation Manual References
•
2.4.9 Printer and PC Connection