Panasonic KX-TD612E Manual
General Features
96
Features Guide
Conditions
•
The following items are required for the DISA feature:
a)
The direction of the DISA message should be assigned as the Intelligent Call Handling
1:1 destination. <[452] Extension Ringing Assignment, [453] Other Extension Ringing
Assignment, [454] ISDN Extension Ringing Assignment, [455] Built-in Voice Message
for Call Handling > This assigns the DISA line and the message accessed by external
callers.
1:1 destination. <[452] Extension Ringing Assignment, [453] Other Extension Ringing
Assignment, [454] ISDN Extension Ringing Assignment, [455] Built-in Voice Message
for Call Handling > This assigns the DISA line and the message accessed by external
callers.
b)
The DISA message(s) should be recorded by the operator.
•
The direction of a DISA message may be selected as the destination of Intercept Routing.
<[457] Intercept Extension> In case a destination of Intercept Routing is not assigned, the
call which was made by DISA function will be disconnected automatically when it is over
a programmed time period.
<[457] Intercept Extension> In case a destination of Intercept Routing is not assigned, the
call which was made by DISA function will be disconnected automatically when it is over
a programmed time period.
•
This system can store up to 10 programmable DISA AA numbers. <[815] DISA Automated
Attendant (AA)> After listening to the DISA message, the caller can dial a single digit. The
number may be the same as the first digit of other numbers (extension number, floating
number, etc.). To avoid confusion, the system waits for the second digit for a
preprogrammed amount of time (default: 1 second). If the timer runs out, the system
assumes that the first digit is a DISA AA number. <[221] DISA Automated Attendant (AA)
Wait Time>
Attendant (AA)> After listening to the DISA message, the caller can dial a single digit. The
number may be the same as the first digit of other numbers (extension number, floating
number, etc.). To avoid confusion, the system waits for the second digit for a
preprogrammed amount of time (default: 1 second). If the timer runs out, the system
assumes that the first digit is a DISA AA number. <[221] DISA Automated Attendant (AA)
Wait Time>
•
The DISA line can be used to originate outside calls if a security code (if required) has been
dialled.
dialled.
•
This system can store up to 32 programmable DISA user codes. Each code should be
different. It is possible to assign a Class of Service number to each code. The Class of
Service of the code defines the Toll Restriction level. <[811] DISA User Codes>
different. It is possible to assign a Class of Service number to each code. The Class of
Service of the code defines the Toll Restriction level. <[811] DISA User Codes>
•
The DISA AA feature can only ring regular extensions (digital proprietary telephones and
single line telephones). It cannot ring ISDN extensions, floating extensions, etc.
single line telephones). It cannot ring ISDN extensions, floating extensions, etc.
Installation Manual References
•
2.5.1 Location of Optional Cards
Programming Guide References
•
[100] Flexible Numbering
•
[203] Intercept Time
•
[221] DISA Automated Attendant (AA) Wait Time
•
[222] OGM Recording Time
•
[223] Built-in Voice Message Recording Time
•
[455] Built-in Voice Message for Call Handling
•
[457] Intercept Extension
•
[809] DISA Security Type
•
[811] DISA User Codes
•
[813] Floating Number Assignment
•
[815] DISA Automated Attendant (AA)