Panasonic S-ICX Manual
216
S-ICX (International) issued January 2000
S-ICX-10-700
Chapter 6. DSLT Features
Section 700 - Operation
To use Extension Busy Override:
Hardware Requirements
•
N/A
Considerations
•
You cannot break in on three-party conference calls.
•
The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.
be sent to both parties when a call is overridden.
Callback Request
Description
If you dial a busy extension, Callback Request enables the System to call you back when that
extension becomes free. When you answer, the System automatically rings the called party again.
extension becomes free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
To respond to the callback request:
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Dial the extension number.
Busy tone
3. Enter the Busy Override code (default = 9 [UK/HK] or 9#
[Taiwan, Malaysia, Indonesia]).
• Alert tone sounds to both extensions
(system programming required)
• Connected to both parties
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Dial the extension number.
Busy tone
3. Enter the Callback Request code (default = 3 [UK/HK] or
3# [Taiwan, Malaysia, Indonesia]).
Ringback tone
4. Replace the handset after you hear the ringback tone.
System calls back when called extension
becomes free
becomes free
Action
Result
1. Lift the handset.
System automatically redials extension