Panasonic S-ICX Manual
Section 700 - Operation
Chapter 3. System Features
S-ICX-10-700
S-ICX (International) issued January 2000
35
Table 7.
System Mode Impact on TRS (Call Barring), Ringing, Attendant, and Built-in Voice Mail
Manual Day/Night Mode
You can manually change the System mode to Day 1, Day 2, Night, Night 2, or Night 3 mode by
either entering the correct dial code or by pressing the appropriately programmed FF key.
either entering the correct dial code or by pressing the appropriately programmed FF key.
When using manual mode, the System may be configured to either use MCO tenant Day/Night modes
or system-wide Day/Night mode.
or system-wide Day/Night mode.
Operation
To switch Day 1/Day 2/Night modes using Feature Access Codes (Versions prior to
3.0):
3.0):
SYSTEM
MODE
TRS (Call Barring)
RING
ATTENDANT
BUILT-IN
VOICE MAIL
VOICE MAIL
Day 1
Day TRS Mode
Day 1 Ring Pattern
Day 1 Attend. Group
Day 1 Message
Day 2
Day TRS Mode
(Same for Day 1 and
Day 2)
(Same for Day 1 and
Day 2)
Day 2 Ring Pattern
Day 2 Attend. Group
Handling
Handling
Day 2 Message
Night
Night TRS Mode
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Message
Night 1
Night TRS Mode
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night 1 Message
Night 2
Night TRS Mode
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Ring Pattern
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night Attend. Group
(Same for Night 1,
and 2)
(Same for Night 1,
and 2)
Night 2 Message
Switch Mode
Procedure
Indication
Toggle Day 1,
Day 2 and Night
Modes
Day 2 and Night
Modes
1. Press the ON/OFF key.
Intercom dial tone
ON/OFF LED lights
2. Enter 760 (UK/HK) or 760# (Tai-
wan, Malaysia, Indonesia).
3. Press the ON/OFF key
ON/OFF LED goes off
If changing to Night mode, Red LED lights
If changing to Day mode, Red LED goes off
Day 2 Mode
1. Press the ON/OFF key.
Intercom dial tone
ON/OFF LED lights
2. Enter 761 (UK/HK) or 761# (Tai-
wan, Malaysia, Indonesia) for the
Day 2 Feature code.
Day 2 Feature code.
3. Press the ON/OFF key
ON/OFF LED goes off
Green LED lights