Panasonic S-ICX Manual

62

S-ICX (International) issued January 2000

S-ICX-10-700

Chapter 3. System Features

Section 700 - Operation

ISDN Charge Data (Format #2 only - originator number applies to ISDN only) - Not Used (Format #2 
only) Future Use

 

Incoming Ringing Time (Format #2 only) (MM=00 to 99 / SS=00 to 59)

H

 

Carriage Return Line Feed

•

A printer or external call accounting system is required to receive Call Logging data.

•

A call must be answered to generate Call Logging data (e.g., answered by Voicemail, call pickup, 
etc.)

•

You can specify which type of Call Logging data format is sent (i.e., either Format 1 or 2).

System Speed Dial (SSD) numbers may be used to outdial calls from extensions that otherwise have 
outgoing call restrictions (i.e., Toll Restriction Service [TRS] Call Barring). 

•

N/A

•

N/A

Toll Restriction Service (TRS) - Call Barring allows access levels, including the prohibition of long 
distance calls or after-hours calls, to be assigned to specific extensions or trunks. This minimizes non-
business related calls and reduces phone bills by only allowing long distance calls over designated 
lines.

TRS (Call Barring) can be used in conjunction with Automatic Route Selection (ARS). 

•

TRS (Call Barring ) classes are set on an extension and trunk basis. Up to 50 TRS (Call 
Barring) classes can be assigned.

•

Each TRS (Call Barring) class is then assigned to a TRS level. This level is used as the basis 
for allowing or restricting calls.

•

There are 10 TRS (Call Barring ) levels available: 0 denies all calls, 1-8 may be partially 
restrictive per assignments, and 9 allows all calls.

•

TRS (Call Barring) can restrict the number of digits dialled (1 to 20 digits limit or no limit).

10

11