Panasonic DP-2310 User Manual
10
Getting To Know Your Machine
Operation Chart
If other function
is in use
is in use
*30 originals (B4/A3)
Face Up
Original Guides
Adjust to the original’s width
From
i-ADF/
ADF
i-ADF/
ADF
From
Platen
Glass
Platen
Glass
Load Paper
Turn the Power
Switch On
(Left side of the
copier)
Switch On
(Left side of the
copier)
Face down
● If the original is not positioned
properly, a portion of the original
may not be copied.
may not be copied.
● For originals smaller than A5
size, position the original within
the A5 area and select A5.
the A5 area and select A5.
or
Tray
Max. 50 originals*
● Adding Paper (Paper Tray)
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Paper Weight: 60-90 g/m
2
Paper Capacity: 550 Sheets (75 g/m
2
)
Load paper lower than Side Guides
Approximately up to 50
A4 size sheets / 75 g/m
A4 size sheets / 75 g/m
2
Paper Weight: 55-133 g/m
2
Turn the Main
Power Switch
On
(Located on
the back of the
Copier)
(See page 8)
Power Switch
On
(Located on
the back of the
Copier)
(See page 8)
Original Guides
■ Basic Operation
A5
A5-R
A4-R
A3
B4
A4
COPY
Max Level Indicator
Sheet Bypass
Until it Stops
Face Down
Side Guides
Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
NOTE:
When paper size is not detected,
remove paper and press Reset Key.
Then, load paper again.
When paper size is not detected,
remove paper and press Reset Key.
Then, load paper again.
NOTE:
When changing the paper size, refer to page 60.
When changing the paper size, refer to page 60.
1
2
1
2
3
4
4
1
2
3
4
4