Panasonic KXTG7875 Operating Guide
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Handset: MOFFN
Base unit: MEXITN
Viewing/editing/erasing call block
numbers
numbers
Handset
1
MMENUN#217
2
MbN: Select the desired entry.
R To exit, press MOFFN.
R To exit, press MOFFN.
3
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Base unit
1
MMENUN#217
2
MbN: Select the desired entry.
R To exit, press MEXITN.
R To exit, press MEXITN.
3
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MEXITN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MEXITN
MEDITN a Edit the phone number. a
MSAVEN a MEXITN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MEXITN
Note for handset and base unit:
R When editing, press the desired dial key to
R When editing, press the desired dial key to
add, MCLEARN to erase.
R When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN (Handset) or MEXITN
(Base unit)
without phone number feature is turned on.
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN (Handset) or MEXITN
(Base unit)
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
base unit.
Important:
R See page 5 for information on the available
R See page 5 for information on the available
model.
Registering a handset to the
base unit
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
1
Handset:
MMENUN#130
MMENUN#130
2
Base unit:
Press and hold MLOCATORN for about 5
seconds until the registration tone sounds.
R If all registered handsets start ringing,
Press and hold MLOCATORN for about 5
seconds until the registration tone sounds.
R If all registered handsets start ringing,
press MLOCATORN again to stop, then
repeat this step.
repeat this step.
R The next step must be completed
within 90 seconds.
3
Handset:
Press MOKN, then wait until a long beep
sounds.
Press MOKN, then wait until a long beep
sounds.
Note:
R While registering, “Base in
R While registering, “Base in
registering” is displayed on all
registered handsets.
registered handsets.
R When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
manual for registration.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
MMENUN#131
R All handsets registered to the base unit
R All handsets registered to the base unit
are displayed.
2
MbN: Select the handset you want to
cancel. a MSELECTN
cancel. a MSELECTN
3
MbN: “Yes” a MSELECTN
4
MOFFN
For assistance, please visit http://shop.panasonic.com/support
47
Programming
TG78xxUS(en)_0221_ver402.pdf 47
2017/02/21 18:24:43