Panasonic ICX Manual

Page of 311
156
ICX (International), issued March/1999
ICX-35-700
Chapter 5. Key Telephone Features
Section 700 - Operation
DP to DTMF Signal Conversion
CPC-96, CPC-288, and CPC-576 All Versions
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from 
DP to DTMF signalling when using a DP trunk. For instance, if you dial into a Voice Mail system 
using a DP trunk, you can switch to DTMF signalling to communicate with the Voice Mail system.
The System can automatically change DP to DTMF tones based on the incoming and outgoing timers.
Operation
To switch from DP to DTMF dialling:
Hardware Requirements
N/A
Considerations
N/A
DSS/72 Console
CPC-96, CPC-288, and CPC-576 All Versions
Description
The DSS/72 console is a 72-key console that can be attached to a key telephone. The 72 keys on the 
DSS/72 can be programmed as Direct Station Select (DSS) keys for internal lines.
In addition to providing direct station selection, the DSS keys also provide Busy Lamp Fields (BLFs) 
that allow you to monitor the status of other extensions. The LED lights red when the assigned 
extension is busy, and lights green when Call Forwarding or Do-Not-Disturb (DND) are activated.
For additional information, see “Flexible Function Keys” on page 158.
Hardware Requirements
DSS/72 console (VB-D631uk [UK] or VB-44320 [HK, Taiwan, Malaysia, Indonesia])
Considerations
Pressing a DSS key while connected to an outside line places the line on hold.
A maximum of 12 DSS/72 consoles can be connected to a 96-port system.
Action
Result
1.   Press the * key or the # key.