Panasonic ICX Manual

Page of 311
Section 700 - Operation
Chapter 6. DSLT Features
ICX-35-700
ICX (International), issued March/1999
 251
Considerations
An alarm tone (default = 60 seconds) will be issued at the specified time.
An extension can have only one Reminder Call set at a time.
To change the Reminder Call, simply enter a new time.
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3 
minutes later.
Trunk Access
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following ways to seize an idle trunk to make an outside call:
Direct Trunk Access
MCO Trunk Access
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access 
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
Hardware Requirements
N/A
Considerations
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk 
from the MCO trunk group by entering the MCO access code.
Action
Result
1.   Lift the handset or press the ON/OFF key.
2.   Enter the Direct Trunk Access code (default = 88).
3.   Enter the desired trunk number.
Outside dial tone
4.   Dial the phone number.