Panasonic ICX Manual

Section 700 - Operation

Chapter 3. System Features

ICX-35-700

ICX (International), issued March/1998

 27

The System supplies a full array of call progress tones. These tones provide audible indications of the 
status of calls and include dial tone, busy tone, ringback tone, error tone, confirmation tone, and 
splash tone. The complete specification for these tones may be found in Section 300 - Installation.

In addition to call progress tones, Direct Station Select (DSS) Light Emitting Diodes (LEDs) and the 
display provide additional indication of the status of calls.

•

N/A

•

N/A

(Note: Analog Caller ID is not available in the UK model). 

A properly equipped ICX supports Caller ID, a service offered by the network telephone service 
provider. The trunk sends calling number information to the ICX after the first ring. Users who have 
display telephones can see Caller ID information as incoming calls ring at their extension and can 
have access to previous calls via the Caller ID Call Log feature. The Caller ID number is recorded in 
Call Logging.

•

Loop-start trunk card (VB-44510) 

•

Caller ID circuit card (VB-44513)

•

ISDN (PRI - T Point) can get calling party information.

•

Caller ID service must be ordered from the local telephone operating company or the 
interexchange carrier.

•

Caller ID data is usually sent between the first and the second rings of the incoming trunk call. 
The trunk may be programmed to immediately ring at the station or wait until after the Caller ID 
digits are received before ringing at the station. If the trunk is programmed to ring immediately, 
the Caller ID digits will not display until after they are received and processed.

•

Caller ID numbers may be denied from being sent for some callers (private). Some long distance 
carriers may not provide Caller ID data (out of area).

•

Caller ID only support the single format (number only). Multiple format (number and name) is 
not supported.