Panasonic ICX Manual

Page of 311
Section 700 - Operation
Chapter 3. System Features
ICX-35-700
ICX (International), issued March/1998
 59
DDI Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the 
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DDI Busy/Delayed 
Ringing destination.
Hardware Requirements
N/A
Considerations
Call Forwarding takes priority over DDI Busy/Delayed Ringing
If the call is part of a hunt group and the Queuing Timer expires, the call is forwarded to the DDI 
Busy/Delay Ringing destination. (See “DDI (DID) Day/Night Busy/Delayed Ringing” on page 
58.)
Busy Lamp Field Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to ring on those 
keys.
Hardware Requirements
N/A
Considerations
ISDN phones may not set BLF ringing.
For more information on BLF ringing, see “Line Appearances” on page 169.
Busy Lamp Field Delayed Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to delay ring on 
those keys. 
Hardware Requirements
N/A
Considerations
ISDN phones may not set BLF ringing.
For more information on BLF ringing, see “Line Appearances” on page 169.
Slide Ringing
Similar to Delayed Ringing, Slide Ringing allows an alternate position to answer calls. If a call is not 
answered within a slide ringing time period, the call can be set to ring at another phone with that trunk 
key.
One possible use for Slide Ringing is in an office with a common secretary. A non-ringing FF key can 
be assigned for each trunk used by the group. If a call is not answered within the slide ringing timer, 
the call will ring the common secretary.
Hardware Requirements
N/A
Considerations
N/A