Panasonic DP-C406 Operating Guide
3
Chapter 1 Problem Solving
1Problem Solving
Troubleshooting
Unit Does Not Operate
Light Copies
z
If the measures outlined above do not solve the problem, call the authorised Panasonic dealer.
Check
Action
Is the display dark?
Check if the Power Switches (Main Power Switch on the
rear and Power Switch on the left side of the machine) are
turned ON and if the power cord is plugged into the AC
outlet.
rear and Power Switch on the left side of the machine) are
turned ON and if the power cord is plugged into the AC
outlet.
Does the Energy Saver key flash (or light), and is the
display turned OFF?
display turned OFF?
Press the Energy Saver key on the Control Panel.
Do any of the U## code and messages appear on the
display?
(U1, U4, U6, U7, U11....etc.)
display?
(U1, U4, U6, U7, U11....etc.)
Perform operations in accordance with each message.
(See page 6)
(See page 6)
Do the Add Staples Indicator and message appear on
the display?
the display?
Do the Add Paper Indicator and message appear on
the display? ( )
the display? ( )
Add papers. (See page 23)
Do the Paper Misfeed Indicator and message appear
on the display? (J##)
on the display? (J##)
Remove the misfed paper. (See pages 10 to 21)
Does the error message “Remove paper from inner
tray” appear on the display?
tray” appear on the display?
Remove the paper from inner tray.
(For the capacity of Inner Tray, refer to Specifications in
the Operating Instructions (For Basic Operations) of
provided booklet.)
(For the capacity of Inner Tray, refer to Specifications in
the Operating Instructions (For Basic Operations) of
provided booklet.)
Do E#-## Indicator and message appear on the
display?
display?
Turn OFF the Power Switch on the left side and the Main
Power Switch on the rear of the machine, and then turn
them back ON. If the error code has not been cleared, call
the authorised Panasonic dealer.
Power Switch on the rear of the machine, and then turn
them back ON. If the error code has not been cleared, call
the authorised Panasonic dealer.
The machine does not accept the next job during
operation, instructed job would not be accepted for a
long time period, or job would not be completed.
operation, instructed job would not be accepted for a
long time period, or job would not be completed.
Turn OFF the Power Switch on the left side and the Main
Power Switch on the rear of the machine, and then turn
them back ON. If the machine still does not accept the next
job, call the authorised Panasonic dealer.
Power Switch on the rear of the machine, and then turn
them back ON. If the machine still does not accept the next
job, call the authorised Panasonic dealer.
Check
Action
Is the Density level set to the “Lighter” side?
Select “Darker”.
Do the Add Toner Indicator and message appear on
the display? (
)
Replace the Toner Cartridge.
(See page 26)
(See page 26)