Panasonic DP-C322 Operating Guide
10
Setup
Parameters
Setup Parameters
Panafax Desktop uses the fax modem in your device that is connected on your network (LAN) for fax
communication.
Before using the
communication.
Before using the
Panafax Desktop, the following parameters must be setup onto your device and PC.
1.
Confirm the device parameters
Make sure that the following device parameters have been set properly in advance. Contact your network
administrator for details.
administrator for details.
Parameter names may differ depending on the type of device you are using.
Refer to the Operating Instruction of your device for the Parameter names.
*1 : User Parameter No. 36 (Relay XMT Password).
Refer to
Fax/Email Settings, User Parameters in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
*2 : Fax Parameter No.143 (Relay XMT Report)Refer to
Fax/Email Settings, Fax Parameters in
the Operating Instructions( For Function Parameters) on the provided CD-ROM.
*3 : Fax Parameter No. 54 (Fax Forward).
Refer to
Fax/Email Settings, Fax Parameters in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
2.
Install the Panafax Desktop
Refer to
Refer to
Panasonic Document Management System in the Operating Instruction (For Setting Up) of
provided booklet. Make sure that the
Panafax Desktop menu is selected when installing the software.
Note:
When configuring with
Send & Receive System (Client-Server Type)
, install the
Panafax Desktop
to
Client PC
and
Panafax Desktop Server
.
3.
Setup the Panafax Desktop parameters.
Follow the instructions on the next page.
Fax/Email Settings
User Parameters
Fax/Email Settings
Fax Parameters
User Parameters
Fax/Email Settings
Fax Parameters
General Settings
- IP Address
- Relay XMT Password*
- Relay XMT Password*
1
- Internet Fax
-
- Relay XMT Report = Off*
2
- Fax Forward*
3
-
Set the Email address to forward the received fax.
Device Parameters
Send
Only
System
Only
System
Send & Receive System
(Stand-alone Type / Client-Server Type)
(Stand-alone Type / Client-Server Type)