Panasonic SC-PM21 Operating Guide
10
RQT7968
Recording the radio
1
Insert the cassette to be recorded on.
2
Tune to the required station (refer page 11).
3
Press [
¶/8 REC] to start recording.
Other basic operations
To
Action
erase a recorded
sound
1) Insert the cassette to be recorded on.
2) Press [TAPE
3] and then [STOP 7].
3) Press [
¶/8 REC].
stop recording
Press [STOP
7].
stop recording
temporarily
1) Press [
¶/8 REC].
2) Press again to resume recording.
record on the other
side of the tape
Turn the cassette over and press
[
¶/8 REC].
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
recording. To record on the tape again, cover as shown.
Side A
Tab for side A
Tab for side B
To re-record
Normal tape
Adhesive tape
Before recording
Preparation:
Wind up the leader tape so that recording can begin immediately.
• Use normal position tapes.
• High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Recording CDs
1
Insert the cassette to be recorded on.
•
OPEN
Insert inside the
guides
Forward side
2
Press [
0 OPEN/CLOSE] to insert the CD.
Press again to close.
3
Press [CD
3/8] and then [STOP 7, -DEMO].
4
Press [
¶/8 REC] to start recording.
Recording specific CDs or tracks
1
Press [CD
3/8] and then [STOP 7, -DEMO].
2
Press [PLAY MODE] to select your desired mode
(refer page 7).
3
Press [
¶/8 REC] to start recording.
Recording programmed tracks
1
Program the tracks you want (refer page 8).
2
Press [
¶/8 REC] to start recording.
Cassette tape – Record
PM21_PC.indd 10
12/23/04 4:44:54 PM