Panasonic DP-180 Operating Guide
Configuring the Printer Driver Settings
50
Windows NT 4.0 (Administrator)
Ports Tab
1. Print to the following port(s)
Displays a list of available ports for printing (Port), their status (Description) and printers that are
connected to these ports (Printer).
connected to these ports (Printer).
2.
/
button
Adds/deletes a new port or a new network path.
3.
button
Configures the selected port. In case of a parallel port, Transmission Retry should be specified.
(See Note 1 and 2)
(See Note 1 and 2)
4. Enable bidirectional support
This setting enables reception of configuration data and status data from the printer.
5. Enable printer pooling
Printer pooling allows data sent to one logical printer to be received and printed by two or more printers.
With printer pooling enabled, a transmitted printing job is output to the first printer that is ready for
printing.
With printer pooling enabled, a transmitted printing job is output to the first printer that is ready for
printing.
NOTE
1. Specify the waiting time (seconds) for the printer to be ready for printing. If a printer is not
ready for printing after the specified time has elapsed, an error message is displayed.
2. If a timeout error occurs frequently upon printing a large size document, specify a larger value
here.
Add Port...
Delete Port
Configure Port...