Panasonic UF-8100 Instruction Manual

19

NOTE

1. For some countries, the handset may not be available because of the country's regulation or 

specification.

2. The shape of the telephone line cable and power cord may differ depending on each countryís 

regulation or specification.

3. The Telephone Line Cable Adapter is available in certain countries only.

Power Cord (Included)

Plug one end of the Telephone
Line Cable into the telephone
jack supplied by the telephone
company and the other end into
the LINE jack on the back of
the machine.

After connecting all Cables and 
Power Cord, turn the Power Switch 
on the back of the machine 
to the ON ( I ) position.

Optional Handset Kit
 (UE-403172)

Connect the Telephone Line Cable from 
the Optional Handset Kit into the 
HANDSET jack on the back of the 
machine.

You can connect an additional standard
single line telephone to the machine.
To connect a telephone,
remove the protective tab on the TEL jack.

Telephone Jack

(Optional G3 Communication Port Kit (UE-407026) is required.)

Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.

LINK Lamp
Illuminates when connected 
to the LAN.
Lamp will not turn ON if LAN 
cable is defective (contains 
breaks).

USB Port
See Operating Instructions 
(For Document Management 
System and Printer)

Blinks when there is data 
traffic on the LAN.

(Refer to the dialling Method.  See 
page 92.)