Panasonic SDR-S100 Operating Guide

VQT0T60

Recording

First, format the SD card if one which has been used on another device is going to be used 
for the first time on this unit. (P66) When the SD card is formatted, all of the recorded data 
(files) is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a 
PC or other device before proceeding with the formatting. When copying images recorded 
using this unit to a PC, you must use MotionSD STUDIO. (P74)

This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time of 
purchase. To watch images on normal TVs (4:3), change the wide mode setting before 
recording (P41) or when playing back the images on the TV screen (P72). 

∫ Basic camera holding

≥ Open the LCD monitor.

Recording cannot start when the LCD monitor 
is closed. However, even if the LCD monitor is 
closed during recording, the power does not 
turn off until recording is ended.

≥ The angle of the LCD monitor can be adjusted 

to suit what you want to record.

≥ We recommend attaching the hand strap 4 

(supplied) to prevent the camera from dropping.

≥ Do not cover the White balance sensor 3 with 

your fingers, etc.

≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2 

with your fingers.

Depending on the TV connected, 
the sides of the images (the part 
outside the dotted line) being 
played may not appear. We 
recommend widening the recording 
range of the objects you want to 
record beforehand.
1 16:9 screen
2 4:3 screen

The clock is not set at the time of purchase. If the screen shows the incorrect date/
time, then adjust it.

1

2

1
2

3

4

VQT0T60_EB.book  32 ページ  ２００５年８月２４日　水曜日　午後１時５７分