Panasonic SDR-S100 Operating Guide
71
VQT0T60
Images recorded by this unit can be played back on a TV.
¬Insert an SD card with recordings into the unit.
1
Open the terminal cover and then
connect the multi cable
connect the multi cable
(supplied) to
the multi-connector terminal [MULTI]
and the TV.
and the TV.
1 Multi cable (supplied)
Insert the plugs as far as they will go.
Insert the plugs as far as they will go.
≥ If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor (optional) is
necessary. Consult your dealer.
necessary. Consult your dealer.
≥ If the TV has an S-Video terminal, then also
connect an S-Video plug. It allows you to
enjoy more beautiful images.
(You must also connect the Video/Audio input
terminals.)
enjoy more beautiful images.
(You must also connect the Video/Audio input
terminals.)
≥ Use the AC adaptor to free you from worrying
about the battery running down.
2
Turn on this unit, then set the mode to
[
[
] or [
].
3
Change the input channel on the TV.
<TV setting>
Example: Set the channel to “VCR2” etc. (The channel set will differ depending on the
terminal to which the cable is connected.)
Example: Set the channel to “VCR2” etc. (The channel set will differ depending on the
terminal to which the cable is connected.)
4
Start playback on this unit. (P58, 61)
The image and audio are output on the TV.
∫ If the image or audio from this unit is not output on the TV
≥ Check that the plugs are inserted as far as they go.
≥ Check the connected terminal.
≥ You cannot playback motion pictures recorded to SD card on this unit by inserting the
≥ Check the connected terminal.
≥ You cannot playback motion pictures recorded to SD card on this unit by inserting the
SD card into a TV with a built-in SD card slot.
≥ Check the TV’s input setting (input switch). (For more information, please read
the operating instructions for the TV.)
Playback on TV
21-pin Adaptor
MULTI
[S-VIDEO IN]
[VIDEO IN]
[AUDIO IN]
1
PC
PC
VQT0T60_EB.book 71 ページ ２００５年８月２４日 水曜日 午後１時５７分