Panasonic SDR-S100 Operating Guide
92
VQT0T60
∫ [
DISPLAY]
≥OFF
≥ON
The screen indications are selected as
shown in the illustration below.
shown in the illustration below.
∫ [
BEEP SOUND]
≥OFF
≥ON
This allows operations such as starting
and ending recording to be signalled by a
beep.
When [OFF] is set, no beep is heard
when an operation such as recording is
started or ended.
and ending recording to be signalled by a
beep.
When [OFF] is set, no beep is heard
when an operation such as recording is
started or ended.
1 Beep
When you start recording or turn on the
power. Also when deleting files, when the
confirmation message appears while
formatting and when this unit is
recognized by the PC or the printer.
2 Beeps
When you pause recording or turn off the
power.
2 Beeps 4 times
If you insert an SD card with the write
protection switch set to
When you start recording or turn on the
power. Also when deleting files, when the
confirmation message appears while
formatting and when this unit is
recognized by the PC or the printer.
2 Beeps
When you pause recording or turn off the
power.
2 Beeps 4 times
If you insert an SD card with the write
protection switch set to
[LOCK]
when a
recording mode has been selected. If you
select a recording mode when an SD
card with the write protection switch set
to
select a recording mode when an SD
card with the write protection switch set
to
[LOCK]
has been inserted. Check the
sentence displayed on the screen. (P95)
∫ [
POWER SAVE]
≥OFF
≥5 MINUTES
[OFF]: The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes passed without
any operation, this unit automatically
turns off to prevent the battery from
running down. When you use this unit,
turn it on again.
≥ In the following cases, the power may
When about 5 minutes passed without
any operation, this unit automatically
turns off to prevent the battery from
running down. When you use this unit,
turn it on again.
≥ In the following cases, the power may
not turn off even when set
[POWER SAVE]
[POWER SAVE]
>[5 MINUTES].
– When connecting to the AC outlet
(When using the AC adaptor)
– When connecting the unit to a PC or
printer via the USB cable
∫ [
INITIAL SET]
≥YES
≥NO
When there is a menu that cannot be
selected depending on a combination of
functions, set to [YES] for changing the
menu settings back to the initial shipping
condition.
selected depending on a combination of
functions, set to [YES] for changing the
menu settings back to the initial shipping
condition.
∫ [
DEMO MODE]
≥OFF
≥ON
This item is used to start the unit
demonstration.
(Only when the mode dial is at the
demonstration.
(Only when the mode dial is at the
or
position)
≥ If you set to [DEMO MODE]
>[ON]
without inserting an SD card, this unit
is automatically set to the
demonstration mode for introducing its
functions. If any button is pressed or
operated, the demonstration mode is
cancelled. If no operations take place
for approx. 10 minutes, the
demonstration mode automatically
starts. To terminate the demonstration
mode, insert an SD card, or set to
[DEMO MODE]
is automatically set to the
demonstration mode for introducing its
functions. If any button is pressed or
operated, the demonstration mode is
cancelled. If no operations take place
for approx. 10 minutes, the
demonstration mode automatically
starts. To terminate the demonstration
mode, insert an SD card, or set to
[DEMO MODE]
>[OFF]. For normal
use, set this function to [OFF].
Setup menu
ON
R 0h00m
;
0h00m00s
15:42
15.12.2005
15.12.2005
SP
OFF
;
15:42
15.12.2005
15.12.2005
DEMO
VQT0T60_EB.book 92 ページ ２００５年８月２４日 水曜日 午後１時５７分