Panasonic NVSJ407EE Operating Guide

POWER

PULL-OPEN

A.DUB

;

PAUSE/STILL

AV1 (TV)

Assembly Editing

This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.

Recording VCR

Preparations

Connect a video movie camera or another VCR to this VCR
as shown.

≥

Display the VCR picture on the TV.

Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.

≥

Make sure that the system is set properly. See page 18.

Select the audio source required by pressing the INPUT
SELECT button

to set A1 or A2.

A1: Through the AV1 (21-Pin Scart) socket.
A2: Through the AV2 (AUDIO IN/VIDEO IN) sockets on

front panel.

Operations
1

Press the Play button

to start playback.

At the point where you want to join a new scene, press
the Pause/Slow button

to put it in the still playback

mode.

Press the REC button

to put it in the recording pause

mode.

Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.

When that point is reached, press the Pause/Slow button

again to start recording the new picture and sound

from the playback unit.

To record (copy) additional scenes, press the Pause/
Slow button

to put this VCR in the recording pause

mode and then perform above steps 4 and 5 again.

At the point where you want to stop recording, press the
Stop button

to finish recording.

Note:

≥

If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to the stop mode to protect the video heads.

Editing