Panasonic pv-dr2714 Operating Guide

• “

” flashes when the unit cannot go to timer recording standby (e.g., a 

recordable disc is not in the disc tray). Check the disc carefully.

•  When you program successive timer recordings to start immediately 

one after the other, the unit cannot record the part at the beginning of 
the later programs (a few seconds when recording with DVD-RAM and 
approximately 30 seconds when recording with DVD-R).

•  If you set DST (Daylight Saving Time) to On when manually setting the 

clock (pp. 17-18), timer recording may not work when summer switches to 
winter and vice versa.

•  When the unit is carrying out a timer recording:

-  You may utilize playback.

•  When the disc is not inserted, the disc is full or a non-recordable disc 

is inserted, the warning message appears because Timer Recording is 
disabled.

•  During Timer Recording, dubbing and editing are disabled.
•  Timer recordings are automatically placed in order of DATE → ON 

(Start Time). 

•  If timer recording times overlap, the program with the earliest start time 

is recorded first. The overlapped portion of the later program will not be 
recorded.

Check to make sure “OK” 
is displayed.

• “

” lights on the Front Display to indicate timer recording standby 

has been activated.

„

• When    appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by 

the unit or the disc.

• Repeat steps 3-5 to program other recordings.

„

Press ▲▼ to select the program and press ENTER. 
Press ◄► to move through the items and change the items 

with ▲▼, then press ENTER.

„

Press ▲▼ to select the program and press CANCEL.
• You cannot delete programs that are currently recording.

„

Press RETURN.
• “ ” lights on the Front Display to indicate timer recording 

standby has been activated.

•  Programs that failed to record are displayed gray. They are automatically 

deleted from the timer recording list at 4 a.m. two days later.

•  During timer recording, you can change the end time as long as the 

recording mode is not “FR”.

This program is currently recording.
The times overlap those in another program. Recording of the 
program with the later start time starts when the earlier program 
finishes recording.
You stopped a weekly or daily timer recording. The icon 
disappears the next time the timer starts recording.
The disc was full so the program failed to record.
The material was copy-protected so it was not recorded.
The program did not complete recording because the disc is dirty 
or some other reason.

Displayed if the recording can fit in the remaining space.

For recordings made daily or weekly, the display will show 
until when recordings can be made (up to a maximum 
of one month from the present time) based on the time 
remaining on the disc.

It may not be possible to record because:
• the disc is write-protected
• there is not enough space left
• the number of possible titles has reached its maximum.

• The timer recording list disappears.

    SET TIMER PROGRAM

 SELECT:         SET:SET
 END   :RETURN

DVD

VCR