Panasonic pv-dr2714 Operating Guide

PRESS AND HOLD DUBBING
  FOR 3 SEC TO START

DUBBING
 
                VCR→DVD
                 EP  XP

Dubbing stops automatically when tape playback is finished or at 

disc end.

„

Press STOP.
• When playback (source) side ends and unit enters Stop mode, 

or, if dubbing is stopped due to an error, a message will briefly 

appear.

Sub Display

•  Insert a cassette containing material to be dubbed.

•  When using a cartridge style disc, confirm that it is not rewrite 

prohibited. 

•  Be sure there is enough space on the disc to accommodate the 

dubbing.

•  Select the recording mode. (XP, SP, LP, or EP).
•  Disengage the disc protect setting.

You can transfer (dubbing) programs recorded on a tape onto 

a disc*1 with one stroke of the button. In One-Touch Dubbing, 

programs are automatically dubbed onto the disc from the playback 

location on the tape. If you want to transfer (dubbing) from the 

desired point, see “Manual Dubbing” on next page.

*

1

 Only DVD-RAM and non-finalized DVD-R discs can be used for transfer 

(dubbing) from a tape. (see page 7.)

•  Copy protected VHS tapes cannot be dubbed to a disc.

STOP

DVD REC

→ DVD

PLAY

PAUSE

„

• Stopping transfer (dubbing) by pressing STOP.
• Changing channels.

-

 During dubbing, you can select and watch TV stations using NUMBER 

keys and Channel ▲▼ keys. To switch back to the dubbing picture, 
press DVD or VCR. If it is the dubbing picture, CH is not displayed.

• Selecting input mode by pressing INPUT.
• Turning unit ON/OFF by pressing POWER. (Dubbing will 

continue even if power is turned off.)

• Changing audio mode by pressing AUDIO.

REC MODE

AUDIO

DVD

NUMBER 

keys

CH ▲▼

INPUT

VCR

•  While One Touch Transfer (Dubbing) is activated, timer recording cannot 

be started.

•  When the transfer (dubbing) is not started or not executed, the 

“DUBBING” indicator blinks for about 7 seconds. Check if the unit is 
properly prepared.